Home > Car Models > Current Projects > Revell 1/24 Enzo Ferrari

Up
1. Body
2. Engine
3. Lowering
4. Chassis
5. Painting
6. Interior
7. Polishing
8. Clear Parts
9. Finishing

Revell 1/24 Enzo Ferrari
Injection Plastic Detailed Model
Scale:   1/24
Manufacturer:   Revell Germany (also available as Revell USA)
Kit Number: 0100567-3000
(
Price:  US$ 18 from eBay
US$ 12 for Revell USA
Release Date:  July 2003
Purchased Date:  July 28, 2003
 
The model is very detailed, as you can see in the right picture.

Engine is sharply molded, and the detail is crisp. 

Engine cover is separate and can be hinged open.  Both front and rear suspension is very detailed, and sock parts are provided for the front, which will be covered after the body is glued. (hinting modelers to cut and open the front hood)  Battery and brake booster isn't included in the kit.

Strangely, the wheel and mirror faces are in a separate tree, but it's not plated.

Clear parts are thin and even, and all markers are represented by clear parts as well.  The tail light is molded in clear red, so you'll need baremetal and clear orange paint to accurately represent the back up and turning light in the center of the four tail light assemblies.

Tires are correct Bridgestone Potenza RE050 Scuderia.  The sizes are very accurate, that they appear slightly smaller in 1/24.

>> Page 1
 

Send mail to with questions or comments about this web site.

Copyright © 1999, 2000, 2001, 2002, 2003 Hiroaki Fukuda

Last modified : 09/17/03