Small enhancements will make a model look complete and professional.
There was a gap between the fender and headlight cover on the driver's
side, so I used putty to fill it.
Because the parking break lever is molded with the center console, I
removed it and reshaped the lever.
The chips at the bottom of the body were filled with superglue.
Before
modification
The headlight is a weak point of this kit. The plated light housing
has a noticeable pin mark, so this parts has to be dechromed and repainted.
After
modification
The pin mark was sanded, and the part was painted with Testor chrome.
I modified the headlight housing to accommodate the lens from the Modeler's
headlight lens set.
Note: After seeing a real Boxster, I discovered that the lens is not a
complete circle. (argh)
Now, it has a more realistic (but incorrect) headlight assembly.