Page 3 of 7

|
Volkswagen New Beetle
|
Updated on 02/21/00 |
While surfacer was drying, the chassis were assembled. The first thing
was to eliminate the seam lines again.
|
A sharp knife was used to shave the seam
as shown. |
For a large and flat area, an orthodox
file was used instead. Usually, files are designed to be used in the pushing
direction to prevent from clogging. |
After sanding was done, Mr. Surfacer was
applied to eliminate the small scratches made during sanding. |
|
Volkswagen New Beetle
|

|
|