No.549

WiSP32設定方法 on Vista


● (No.549) WiSP32設定方法 on Vista (2007年11月1日)
　-------------------------------------------------

WiSP32 は、Windows95/98/2000/XP上では正しく動作することは確認しています。
WiSP32 を Windows Vista上でインストールすると、「セットアップは完了した」
というメッセージが出るところまでは行き、一見インストールが完了したように
見えます。しかし、いざ、gsc.exe を立ち上げようとすると、エラーメッセージ
が出て立ち上がりません。これは Vista のレジストリに セットアップ登録情報
が正しく書き込まれてないことが原因です。

これを解決するために、いったん Windows XP上でレジストエディタregedit.exe
を立ち上げて、WiSPレジストリをエクスポートして保存します。そして、改めて
Vista上でレジストエディタ regedit.exe を立ち上げて、このエクスポートした
保存ファイルを、Vista のレジストリにインポートします。

この エクスポート/インポート の操作で、WiSP32 を Vista上で正しく動作する
ようにできます。このWiSPレジストリは、いずれも次のレジストリ内に結果とし
て生成されます。[HKEY_LOCAL_MACHINE\SOFTWARE\WiSP]


Subject: [amsat-bb] Re: WiSP on Vista
From: Alan
To: amsat-bb
Date: Wed, 31 Oct 2007 17:07:12 -0500

Hi Mineo and the group,  I'm not sure what you mean that GSC.EXE will not
work on Vista. I am running WISP32 on Vista Business and both GSC.EXE and
MPSE.EXE run.

I didn't realize there was a problem, but that may be because of the way
I install WISP32. I don't!

>From a working version of WISP32 on and older XP computer or from a backup

1 - copy the entire C:\WISP32 (correct C:\WISP) folder to the C: drive of
    Vista because I'm too lazy to reconfigure the QTH, radio, rotator and
    individual satellites etc that is required with a new clean install.

2 - on the XP computer, export the entire WISP32 WISP registery
    [HKEY_LOCAL_MACHINE\SOFTWARE\WiSP] to a file.

3 - on the Vista PC import the WISP32 WISP registery - you may want to
    have set a restore point before doing this :-)

Create your shortcuts and enjoy...

I use this technique every time I'm forced to rebuild my XP or Vista images
which is a couple of times a year because I often do one too many tweaks and
end up breaking my whole O/S.

73, Alan VE4YZ


-----Original Message-----
Behalf Of Mineo Wakita
Sent: October 31, 2007 4:51 AM
Subject: [amsat-bb] WiSP on Vista

I confirmed that gsc.exe could not work on Windows Vista.
We can setup seemingly WiSP on Vista, but gsc.exe can not run with an error
message. I guess the correct setup information are not written into Registry.

JE9PEL, Mineo Wakita


-------------------------------------
Subject: [amsat-bb] Re: WiSP on Vista
From: Mineo Wakita
Date: Thu, 01 Nov 2007 19:46:54 +0900

Hello Alan VE4YZ and ALL,

I succeeded in setup WiSP on Windows Vista,
according to Export/Import of Registry in Xp/Vista.

Thank you very much.

JE9PEL, Mineo Wakita


-----------------------------------------
Subject: RE: [amsat-bb] Re: WiSP on Vista
From: Alan
Date: Wed, 31 Oct 2007 22:23:14 -0500

Hi Mineo, attached is a JPG of WISP32 running GO-32 on Vista, with GSC.EXE,
MPSE.EXE, VIEW-DIR and the map running at the same time.  The message from
VE4WSC to VE4YZ automatically popped open when received.  To me, Vista and
WISP32 are completely compatible.

You will also see that VISTA is running within a VMware workstation so it
is a guest on another operating system using the host computers COM1 to
the TNC. WISP32 has the TNC as COM1 set for 9600 baud and the COM1 on Vista
is configured at 19200 baud in the Device Manager.

I have received no warning or error messages from either Vista nor WISP32.

I hope this helps you.
73, Alan




[Supplement]

Subject: [amsat-bb] Re: WiSP under Windows 7
From: Alan
Date: Sun, 10 Mar 2013 14:13:36 -0500

I have it running on WIN7 32 bit with no problem.  I installed it about 2
years ago, and don't recall having to do anything special.  I use another
program for tracking, but I used the message functions with the AO-51 BB.

It helps to install ancient programs in another directory than
"Program Files" if run from a non-admin account, to prevent access issues.
I have a C:\MYPROGRAMS directory for that.

73s,
Alan
WA4SCA
　トップへ戻る．
　前のページへ戻る．
　次のページへ移る．
　ホームページ(目次) へ戻る．