IO-26 on 435.790MHz


● (No.507) IO-26 on 435.790MHz (2006年11月26日)
 -----------------------------------------------

本日(11/26) 15:07 JST のパスで、捜していた IO-26 の USB 信号を、やっと
捕らえました。公称の周波数よりも、だいぶ下にいました。
間違いなく IO-26 です。次のパスで デコードできました。以下のとおりです。

Sats. IO-26
Freq. 435.790MHz +/- 10kHz
Mode  1200bps PSK(USB)
Date  07:49-08:00 UTC, 26 Nov 2006

ITMSAT>MBLCTL [11/26/06  16:56:26] <UI>:.....
ITMSAT>MBLCTL [11/26/06  16:56:27] <UI>:.....
ITMSAT>MBLCTL [11/26/06  16:56:27] <UI>:.....
ITMSAT>MBLCTL [11/26/06  16:56:28] <UI>:.....


-----------------------------------------------------------------------
Subject: AW: [amsat-bb]  IO-26 decoded !
From: "Mike Rupprecht"
Date: 18:03, 26 Nov 2006

Hi Mineo,

try to receive the telemetry in KISS Mode:

ITMSAT-1>MBLCTL>UI,?,F0:
C0 80 9A 84 98 86 A8 98 00 92 A8 9A A6 82 A8 03 03 F0 54 27 E5 80 00 18 01 0D 02 00 03 11 04 00 05 13 06 17 1A BA C0
ITMSAT-1>MBLCTL>UI,?,F0:
C0 80 9A 84 98 86 A8 98 00 92 A8 9A A6 82 A8 03 03 F0 54 27 E4 80 00 18 01 0D 02 00 03 12 04 00 05 14 06 16 98 2B C0
ITMSAT-1>MBLCTL>UI,?,F0:
C0 80 9A 84 98 86 A8 98 00 92 A8 9A A6 82 A8 03 03 F0 54 27 E3 00 00 19 01 0C 02 00 03 12 04 00 05 14 06 16 5C 04 C0
ITMSAT-1>MBLCTL>UI,?,F0:
C0 80 9A 84 98 86 A8 98 00 92 A8 9A A6 82 A8 03 03 F0 54 27 E2 00 00 19 01 0D 02 00 03 11 04 00 05 13 06 16 1B A9 C0
ITMSAT-1>MBLCTL>UI,?,F0:
C0 80 9A 84 98 86 A8 98 00 92 A8 9A A6 82 A8 03 03 F0 54 27 E1 80 00 18 01 0D 02 00 03 12 04 00 05 14 06 17 9A B8 C0

... and then convert the values according the following table.

(all Microsat decoding equations are of the form A*n^2 + B*n + C )

Ch#   description       C             B          A           units
------------------------------------------------------------------ 
 0    Rx D DISC:      +9.202       -0.08990     0.000       kHz 
 1    Rx D S meter:   +0.000       +1.000       0.000       Counts 
 2    Rx C DISC:      +9.179       -0.09277     0.000       kHz 
 3    Rx C S meter:   +0.000       +1.000       0.000       Counts 
 4    Rx B DISC:      +9.837       -0.08838     0.000       kHz 
 5    Rx B S meter:   +0.000       +1.000       0.000       Counts 
 6    Rx A DISC:      +9.779       -0.09144     0.000       kHz 
 7    Rx A S meter:   +0.000       +1.000       0.000       Counts 
 8    Rx E/F DISC:    +10.817      -0.09911     0.000       kHz 
 9    Rx E/F S meter: +0.000       +1.000       0.000       Counts 
 A    +5 Volt Bus:    +0.000       +0.0305      0.000       Volts 
 B    +5V Rx Current: +0.000       +0.000250    0.000       Amps 
 C    +2.5V  VREF:    +0.000       +0.0108      0.000       Volts 
 D    8.5V BUS:       +0.000       +0.0391      0.000       Volts 
 E    IR Detector:    +0.000       +1.000       0.000       Counts 
 F    LO Monitor I:   +0.000       +0.000037    0.000       Amps 
10    +10V Bus:       +0.000       +0.0500      0.000       Volts 
11    GASFET Bias I:  +0.000       +0.000026    0.000       Amps 
12    Ground REF:     +0.000       +0.0100      0.000       Volts 
13    +Z Array V:     +0.000       +0.1023      0.000       Volts 
14    Rx Temp:        +101.05      -0.6051      0.000       Deg. C 
15    +X (RX) temp:   +101.05      -0.6051      0.000       Deg. C 
16    Bat 1 V:        +1.8225      -0.0038046   0.000       Volts 
17    Bat 2 V:        +1.9418      -0.0046890   0.000       Volts 
18    Bat 3 V:        +1.8699      -0.0041641   0.000       Volts 
19    Bat 4 V:        +1.7403      -0.0032880   0.000       Volts 
1A    Bat 5 V:        +1.8792      -0.0042492   0.000       Volts 
1B    Bat 6 V:        +2.0499      -0.0054532   0.000       Volts 
1C    Bat 7 V:        +1.9062      -0.0045331   0.000       Volts 
1D    Bat 8 V:        +1.7536      -0.0033192   0.000       Volts 
1E    Array V:        +8.055       +0.06790     0.000       Volts 
1F    +5V Bus:        +2.035       +0.0312      0.000       Volts 
20    +8.5V Bus:      +5.464       +0.0184      0.000       Volts 
21    +10V Bus:       +7.650       +0.0250      0.000       Volts 
22    BCR Set Point:  -6.1130      +1.1270      0.000       Counts 
23    BCR Load Cur:   -0.0477      +0.00767     0.000       Amps 
24    +8.5V Bus Cur:  -0.00179     +0.000894    0.000       Amps 
25    +5V Bus Cur:    -0.00104     +0.00406     0.000       Amps 
26    -X Array Cur:   -0.00995     +0.00243     0.000       Amps 
27    +X Array Cur:   -0.02370     +0.00254     0.000       Amps 
28    -Y Array Cur:   -0.02220     +0.00273     0.000       Amps 
29    +Y Array Cur:   -0.01810     +0.00259     0.000       Amps 
2A    -Z Array Cur:   -0.02230     +0.00221     0.000       Amps 
2B    +Z Array Cur:   -0.02000     +0.00232     0.000       Amps 
2C    Ext Power Cur:  -0.02000     +0.00250     0.000       Amps 
2D    BCR Input Cur:  -0.02345     +0.00355     0.000       Amps 
2E    BCR Output Cur: +0.00869     +0.00303     0.000       Amps 
2F    Bat 1 Temp:     +101.05      -0.6051      0.000       Deg. C 
30    Bat 2 Temp:     +101.05      -0.6051      0.000       Deg. C 
31    Baseplt Temp:   +101.05      -0.6051      0.000       Deg. C 
32    PSK TX RF Out:  -0.0291      +0.00361     +0.0000869  Watts 
33    RC PSK TX Out:  +0.0055      +0.00172     +0.0001180  Watts 
34    PSK TX HPA Temp:+101.05      -0.6051      0.000       Deg. C 
35    +Y Array Temp:  +101.05      -0.6051      0.000       Deg. C 
36    RC PSK HPA Temp:+101.05      -0.6051      0.000       Deg. C 
37    RC PSK BP Temp: +101.05      -0.6051      0.000       Deg. C 
38    +Z Array Temp:  +101.05      -0.6051      0.000       Deg. C  
39    S band TX Out:  -0.0088      +0.00435     0.000       Watts 
3A    S band HPA Temp:+0.000       +1.000       0.000       Counts

73, Mike
DK3WN


-----------------------------------------------------------------------
衛星 IO-26 の ミッションディレクター から私信を受け取りました。
現在、衛星は セーフモード に入っており、テレメトリチャンネルは
限定的に送信されているそうです。

Subject: [amsat-bb:95709] Re: IO-26 decoded !
From: "Alberto E. Zagni"
Date: 18:43, 27 Nov 2006

Mineo and Mike,
thank you very much for your reports of reception and decoding
of ITAMSAT IO-26 after 13+ years in orbit!
The spacecraft is in SAFE mode (MBL) and is trasmitting a limited
number of telemetry channels.
The equations Mike is referring, to are those trasmitted by IHT
high level software, currently not operational.
If anybody is interested I can pass the equations and channels
valid in MBL mode.
Any reception report is welcome!

Alberto I2KBD
ITAMSAT Mission Director


-----------------------------------------------------------------------

http://www.asahi-net.or.jp/~ei7m-wkt/numbr522.htm


 トップ へ戻る.

 前のページ へ戻る.

 次のページ へ移る.

 ホームページ(目次) へ戻る.