新WiSP3214 と初期設定 (完全削除と再インストール)



● (No.189) 新WiSP3214 と初期設定 (完全削除と再インストール) (2000年4月28日)
 ---------------------------------------------------------------------------

WiSP最新情報 へ移る
WiSP初期設定 へ移る
WiSP完全削除 へ移る


================
WiSP最新情報
================

Y2K問題をクリアした新しい gsc2.03 , mspe2.01 を含む WiSPプログラム群
の 新「wisp3214.exe」が、次のURLに更新登録されています。
(2000年12月現在の最新バージョンは WiSP3215 です。)

http://www.amsat.org/amsat/ftp/software/win32/wisp/

これらのプログラムを、セットアップしやすく編集し直した LZH圧縮型式の
ファイルとして、下記のJAMSATサーバーとHPに登録してあります。(許可済)

http://www.jamsat.or.jp/anonftp/software/
http://www.ne.jp/asahi/hamradio/je9pel/


--- 以下、原文 ---

Date: Wed, 05 Jan 2000 02:03:44 +0000
From: Roy Welch [rdwelch@swbell.net]
Subject: [amsat-bb] WiSP Update - GSC 2.02
To: amsat-bb@amsat.org

Hi Guys,

Chris has asked me to upload an update for the WiSP32 GSC module.
This update only corrects the problem with year 2000 keps updating.
There may be an additional update of GSC soon to correct some other
items.  The file will be put on KO-25, UO-22 and is already on the
AMSAT ftp site at

ftp://ftp.amsat.org/amsat/software/win32/wisp.

The file will be GSC202.ZIP.
It has also been incorporated in the WiSP3213.EXE file.

As always retain your old GSC until you are satisfied with the update.
It seems to be working OK here.

73, Roy -- W0SL


Date: Fri, 07 Jan 2000 15:55:01 +0000
From: Roy Welch [rdwelch@swbell.net]
Subject: [amsat-bb] GSC Update 2.03
To: amsat-bb@amsat.org

Hi Guys,

Chris has released GSC 2.03 which seems to have corrected the Track Box
problem. It has been tested at a site where the Track Box is being used
and where the problem was experienced.  This version corrected it.
It will be uploaded to KO-25, UO-22 and the AMSAT ftp site at
ftp://ftp.amsat.org/amsat/software/win32/wisp.
The file will be GSC203.zip.

Chris has burned some midnight oil getting this update out.
There are a few more items you will find in this version.

Here's the additions list -:

1.  Tx Port: In TNC Setup the item 'Tx Port' has been added.  This is
only used for TNCs with multiple modems such as the Symek TNC3S.
It switches the the PTT control between the two modems.  In general,
this should be set to 0 for single modem TNCs.  It will only be used
when a new version of MSPE is released in the next couple of weeks.

2.  Rotator Ports: COM1 to COM12 can be used for the rotator port.

3.  DDE Interface:  The current MA number has been added to the end
of the DDE string.

4.  There is an additional item for Satgates on the Satgate Tab of the
Satellite Setup.

5.  The Flip Mode seems to work now.  I just checked it out last night
and it went into the flip mode on a pass. This was not one of the items
in Chris'list of fixes for this version, but it may be fixed now anyway.
Try it out.

As usual keep your old version until you are satisfied with the perfor_
mance of this one.

-- 
73, Roy

Internet: w0sl@amsat.org
Home Page: http://home.swbell.net/rdwelch
------------------------------------------

                                                                            トップ へ戻る



================
WiSP初期設定
================

※この原稿について、WiSPマネージャーの Roy Welch [rdwelch@swbell.net]
 氏から貴重な意見をいただきました。下記の《補足》を参照して下さい。


この「WiSP3214」をセットアップするのは大変難解なのですが、その方法を
手順を追って次に解説します。その詳細については、次のHPに登録してある
「eisei15.txt」,「wisphlpj.txt」、そして下記HPの中で解説してあります
ので、参照して下さい。

http://www.ne.jp/asahi/hamradio/je9pel/
http://www.asahi-net.or.jp/~ei7m-wkt/


1.  C:/ディレクトリ(フォルダ)直下に、wispサブディレクトリを作成する。
    つまり、C:/wisp を作る。

2.  このwispディレクトリ内に wisp32.lzh をコピーし、LHAソフトを用い
    て解凍する。

      注:WiSP32xx.EXE が現在のファイルフォーマットで、自己解凍型式
        になっています。 最新バージョンは WiSP3214 です。

3.  解凍して現れたファイルの内、二つのファイルを次の所に移動する。

            bwcc.dll  -->  C:/Windows/System
            wisp.hlp  -->  C:/Windows

      注:現在はこれは必要ありません。インストールプログラムが自動
        的に、必要なファイルを正しいディレクトリに移動させます。

4.  解凍して現れた setup.exe を、Windows95上で指定し実行する。

5.  WiSP Setup画面の中で、次の設定をする。

    (1) WiSP Directory を C:/wisp と指定
    (2) I want to register をチェック
    (3) 自局Callsignを入力
    (4) Registration番号を入力 (未申請の場合は wispregi.txt を参照)
    (5) この後に現れる10回ほどのポップアップメッセージには、すべて
        Yesをクリックする。(PIFファイルは削除しない)

6.  Windows95をいったん終了した後、C:/ディレクトリ内の autoexec.bat
    に、次の記述をする。

            set tz=jst-9
            share /f:4096 /l:75
            path = c:\wisp

    そして、gsc.exe を再度立ち上げる。

      注:現在の WiSP32では必要ありません。WiSP32では、TZパラメータ
        ではなく、Windows Time Zone で設定されます。 Share も必要
        なく、Path は自動的にセットアッププログラムによって設定さ
        れます。

7.  WiSP Unregistered Copy画面が自動的に現れ、Callsignは表示されて
    いるが、Registration Numberが空欄のままなので、改めて取得番号を
    ここで入力し、Registerをクリックする。(Trialの場合は未入力)
    次回の立ち上げから、この画面は表示されない。

8.  GSC - Setup - General Setup - WiSP Program Directory において、
    C:/wisp を確認。 Display time in: Local を選択。

9.  GSC - Setup - Station Setup において、自局の緯度・経度を入力。
            Latitude   35.4 N (北緯)
            Longitude 139.6 E (東経)


10. GSC - Setup - Edit MSPE equations をクリックして現れる次の
    「ファイル C:/wisp/MSPE equations.TXT が見つかりません。
     新しいファイルを作成しますか?」 のメッセージにおいて、
    Yes をクリックする。

11. NOTEPAD(メモ帳)が自動的に立ち上がった後、次の手順で操作する。

    ファイル - 開く - Mspeeq~1.txt - 開く - ファイル - 
            名前を付けて保存 - MSPE Equations.TXT 指定 - 保存

    ここで、「C:/wisp/MSPE Equations.TXT このファイルはすでに
    存在します。上書きしますか?」 のメッセージが現れるので、
    Yes をクリックして、NOTEPADを閉じる。

      注:これはもはや必要ありません。 AMSAT が提供しているバー
        ジョンでは、正しいファイル名でこのファイルを解凍します。

12. GSC - Setup - Edit View-Dir equations をクリックして現れる次の
    「ファイル C:/wisp/View-Dir equations.TXT が見つかりません。
     新しいファイルを作成しますか?」 のメッセージにおいて、
    Yes をクリックする。

13. NOTEPAD(メモ帳)が自動的に立ち上がった後、次の手順で操作する。

    ファイル - 開く - View-d~1.txt - 開く - 
            [ZL2TPO] の部分を [JE9PEL](自局コールサイン)に書き換え
            destination="ZL" を destination="JE9PEL" と書き換え - 
            名前を付けて保存 - View-Dir Equations.TXT 指定 - 保存

    ここで、「C:/wisp/View-Dir Equations.TXT このファイルはすでに
    存在します。上書きしますか?」 のメッセージが現れるので、
    Yes をクリックして、NOTEPADを閉じる。

      注:これももはや必要ありません。 AMSAT が提供しているバー
        ジョンでは、正しいファイル名でこのファイルを解凍します。

14. GSC - Setup - MSPE Setup - Sat Change - Automatic - OK

15. GSC - View-Dir Setup - Maximum messages to load - 900 - OK

16. GSC - MsgMaker Setup - Message expiry time - 7 - OK

      注:これは 7 に設定してはいけません。最大値は 4 で、大きな
        ファイルに対してダウンロードをする時に必要な日数です。
        通常は衛星上の保存領域を小さくしておくために、2 にして
        おくべきでしょう。そして、このファイルはその満期期間で
        削除されます。その時に、新しいメッセージにとって必要と
        されるファイル領域として使われるでしょう。

17. GSC - ProcMail Setup - Automatic Keps file updating において
    Update with any keps file をチェックする。

18. 次に、同梱のケプラー軌道要素 20107kep.txt (2000年1月7日付け)を
    認識させる。(今後最新の軌道要素を AMSAT-NAから入手する必要あり)
    GSC - Database - Update Satellite Database - 20107kep.txt - OK

    同梱の wisp.kep には、既にこの軌道要素が自動的に認識されている
    ので、ポップアップ画面上のほとんどの衛星において「Not Updated」
    と表示されるが、最新の軌道要素を用いて更新した時には「Updated」
    と表示される。

19. GSC画面上に個々の衛星のスケジューリングを表示させるために、次の
    ような設定をする。衛星KO-25 を例に挙げる。

    GSC - Setup - Satellite Setup - Satellites
            - New - General - Name                KO-25
                              Satellite Type      PacSat
                              Broadcast Callsign  HL02-11
                              BBS Callsign        HL02-12
                              Priority            1
                              Frequencies         (無記入)
                              TNC Settings        (確認)
                              Directries          (確認)
                              MSPE Settings       (確認)

    GSC - Setup - Satellite Setup - Satellites - Edit - 
    MSPE Settings では、

            Update Keps from broadcast
            Uploading enabled
            Grab all heard files
            Brock ALL BBS files
            Acknowledge receipt
            Load View-Dir at start of pass
            Close View-Dir at end of pass

    の七項目にチェックを入れておくと充分。

      注:これは衛星のパスの間に全てを開いておきたい時のことです。
        必要に応じて設定して下さい。

    最後に、OK - Close をクリックすると、GSC画面上に自動的にスケ
    ジューリングが表示される。

20. 参考に、他の衛星の Broadcast Callsign, BBS Callsign を挙げる。

  +------------------------------------------------------------------------------------------+
  : Sats ,  AO-16      LO-19     UO-22      KO-23    KO-25    IO-26     TO-31       UO-36    :
  +------------------------------------------------------------------------------------------+
  : Broad,  PACSAT-11  LUSAT-11  UOSAT5-11  HL01-11  HL02-11  ITMSAT-11  TMSAT1-11  UO121-11 :
  : BBS  ,  PACSAT-12  LUSAT-12  UOSAT5-12  HL01-12  HL02-12  ITMSAT-12  TMSAT1-12  UO121-12 :
  +------------------------------------------------------------------------------------------+

    周波数については、eisei14.txt(第161話)または HP(No.179)を参照。

21. この後、最新のケプラー軌道要素を用いて 18.の操作を行った時は、
    GSC画面上にその結果を反映させるために、次の操作を必ず行う。

    GSC - Tracking - Redo Schedule

22. 世界地図上に衛星の軌跡を表示させるために、次の設定を行う。

    GSC - Tracking - Track - Satellites - KO-25 - ADD - OK
    GSC - Tracking - Graphic Track - Tracking - Select Satellite
                                                      - KO-25 - OK

                                                                            トップ へ戻る



《補足》
------------------------------------------------------------------
Subject: [jamsat-amsat-bb:31418] Re: WiSP Config Tutorial
From: Roy Welch [rdwelch (at) swbell.net]
To: PAT McGRATH [patricio (at) cyberg8t.com]
Cc: Fernando Mederos [fmederos (at) adinet.com.uy], amsat-bb (at) amsat.org,
    Astronautic Technology [tiung (at) po.jaring.my]
Date: Tue, 04 Apr 2000 19:21:16 +0000

PAT McGRATH wrote:
> 
> I found the following of great help.
> http://www.ne.jp/asahi/hamradio/je9pel/wispinse.txt
> 
> ----

There some things in that document that are no longer correct.

-- 
73, Roy


    ---------------------
In  How to install WiSP32
    ---------------------

-----------SNIP--------------

2.  Copy 'wisp32.zip' into C:/wisp and extract them.

The WISP32xx.EXE file is the current format and is self extracting.

-----------SNIP--------------

3.  Move into another directry the next two files.

             bwcc.dll  -->  C:/Windows/System
             wisp.hlp  -->  C:/Windows

No need to do this.  The Install program will move necessary files to the
correct directory.

-------SNIP-------

6.  Exit Windows95 and add the next words in 'autoexec.bat'.

             set tz=jst-9
             share /f:4096 /l:75
             path = c:\wisp

The above is not required with WiSP32.  WiSP32 takes the time zone from the
Windows Time Zone setting, not the TZ parameter.  Share is nor required and
the path is automatically set in the Setup program.

---------SNIP-------------

11. NOTEPAD File - Open - Mspeeq~1.txt - Open - File - 
        Save attached new file name - MSPE Equations.TXT - Save

    In the message  [C:/wisp/MSPE Equations.TXT  Overwrite?],
    Click 'Yes'

No need to do this any longer.  The AMSAT distributed versions will extract
this file with the correct name.

--------SNIP---------

13. NOTEPAD File - Open - View-d~1.txt - Open - 
        Remove [ZL2TPO] and add [your callsign]
        Remove destination="ZL" and add destination="your callsign"
        Save attached new file name - View-Dir Equations.TXT - Save

No need to do this any longer.  The AMSAT distributed versions will extract
this file with the correct name.

------------SNIP------------

16. GSC - MsgMaker Setup - Message expiry time - 7 - OK

Do not set this to 7.  The maximum value used is 4 and this should only be
used for large files that will take a while to download.  Normally this
should be left set to 2 to keep the file space minimized on the satellite. 
Even at that, the file will not be deleted at the expiration time.  At that
time it is available to be deleted if the file space is required for new
messages.

----------SNIP-----------

19. GSC - Setup - Satellite Setup - Satellites
            Acknowledge receipt

Only used by UO-22

            Load View-Dir at start of pass
            Close View-Dir at end of pass     etc.

Only if you want this window open all during the pass.  You can leave it
unloaded and call it up any time you wish.
------------------------------------------------------------------

                                                                            トップ へ戻る



================================
WiSP完全削除と再インストール
================================

WiSP32の再インストールの方法についてですが、それには 旧Versionの
WiSPディレクトリを削除するだけでは不十分です。併せて Windows95の
レジストリからも、WiSPに関連した項目の全てを完全に削除しないと、
次に WiSPを再インストールする際に影響を残してしまいます。

まず、WiSP(GSC)において行なった諸設定は、Windows95のレジストリの
中枢部に記憶されるようになっています。つまりWiSPを完全に削除する
には、Windows95標準の レジストリエディタ を用いる必要があります。

このレジストリを操作する時は非常に危険が伴いますので、各自の責任
において慎重に行なって下さい。 次にその手順の概略を紹介します。 


1.  Wispディレクトリを丸ごと削除する。

2.  スタート - ファイル名を指定して実行 - 参照
      - C:\Windows - Regedit.exe - 開く - OK - 
        - HKEY_LOCAL_MACHINE - SOFTWARE - WISP - 編集 - 削除
    さらに WiSP関連の項目を検索し、全て削除する。

3.  C:\直下に wispディレクトリを再作成し、wisp32 を解凍する。

4.  Setup.exe を指定し、全てを手順どおり再インストールする。

5.  GSCの立ち上げ直後にレジストレーション番号を登録し、次に
    GSC - Setup - Station Setup において 自局の緯度・経度を
    入力する。

6.  拙著、「衛星通信入門」の中の次の四つの原稿を参照をして、
    「View-Dir Equations.TXT」「MSPE Equations.TXT」の二つ
    のファイルを、GSC - Setup の中で生成する。

        [第83話(No.90)]   WiSP_3207 [Windows95版] 抄訳
        [第84話(No.91)]   WiSP_3207 スケジューリング
        [第99話(No.113)]  WiSP32(GSC201a) 初期設定補足
        [第171話(No.189)] 新WiSP3214と初期設定

7.  jamsat-keps(keps@amsat.org)等から取得した最新の軌道要素
    ファイルを wispディレクトリに保存する。

8.  GSC - Database - Updata satellite database - ファイル名
                                  - 開く - Updata Keps - OK

9.  GSC - Setup - Satellite Setup - Satellites
          - New - General - Name                (例)KO-25
                            Satellite Type      (例)PacSat
                            Broadcast Callsign  (例)HL02-11
                            BBS Callsign        (例)HL02-12
                            Priority            (例)1
                            Frequencies         (無記入)
                            TNC Settings        (確認)
                            Directries          (確認)
                            MSPE Settings       (確認)



G6LVB / Howard Long wrote at 28 Jun 2002:

o Shut down Wisp
o Rename the Wisp.kep file to something else (just in case)
o Restart Wisp.
o For each satellite which was previously scheduled, you will get an error
  "GSC cannot find satellite xx-xx in the keplarian database....".
  OK each message.
o Re-import the keps (Database -> Update Satellite Database)
o Shutdown Wisp
o Restart Wisp
o Tracking -> Redo Schedule



WiSP.KEP 変更方法 by JE9PEL/1

WiSP 内における軌道計算は、軌道要素衛星オブジェクトナンバーを元に行って
います。 従がって、衛星のオブジェクトナンバーが変更になるような場合には
その度に、WiSP が認識している関係するファイルを差し替える必要があります。
具体的には次の手順で行います。

1. C:\wisp\WiSP Schedule.DAT および C:\wisp\WiSP.KEP の二つを削除。
2. GSC.EXE を立ち上げる。
3. 'GSC cannot find satellite ... in the keplerrian database' という
   メッセージが現れるので、OK を押す。これを設定衛星の数だけ繰り返す。
4. GSC - Database - Update Satellite Database  として正しい軌道要素
   が書かれている TLE テキストファイルを指定する。
5. GSC - Setup - Satellite Setup - (衛星名) - Edit - OK
   これを設定衛星すべてに対し行う。
6. GSC - Tracking - Redo Schedule として完了。


 トップ へ戻る.
 次のページ へ移る.
 ホームページ(目次) へ戻る.