衛星LO-19 PSKテレメトリ解析


● (No.191) 衛星LO-19 PSKテレメトリ解析 (2000年1月17日)
 ---------------------------------------------------------

本日(Jan 17)は、衛星LO-19からの PSKテレメトリを受信し保存しました。

プログラム: WiSP3213(gsc V2.03), kiss2asc.exe, tlmdc4.exe
受信周波数: 437.500MHz(USB), 1200bps, PSK_mode
受信時刻 : 00:43-00:57UTC, 02:22-02:37UTC, 04:05-04:11UTC
      (09:43-09:57JST, 11:22-11:37JST, 13:05-13:11JST)

まず、保存した拡張子.TLMのファイルを、[kiss2asc.exe]を用いてアスキー
ファイルに変換した一部を紹介します。 そして次に、マイクロサット用の
テレメトリデコーダ[tlmdc4.exe] を用いて解読した一部を紹介します。
また、この時のWiSP受信画像ファイル[00117l19.gif]と、KISS受信ファイル
[00117l19.zip]を、下記のURLに載せておきました。

今ここに紹介した、[WiSP, kiss2asc, tlmdc4] の三つのプログラムによる
解析データの例は、各々 [02:27:08UTC, Jan 17, 2000] と表示されている
同時刻のものです。各々を比較検討すると多くの事が得られると思います。

衛星内部時刻は、世界標準時(UTC)よりも 約8分ほど遅れていることもわか
りました。 つまり ここで紹介している三つのデータ例は、正確には全て
 02:35:08UTC のものといえます。


[With kiss2asc.exe]
----------------------------------------------------------------------
fm LUSAT-1 to TIME-1 ctl UI pid F0
PHT: uptime is 534/12:52:30.  Time is Mon Jan 17 02:27:08 2000
 
fm LUSAT-1 to TLM ctl UI pid F0
..........

fm LUSAT-1 to AMARG ctl UI pid F0

Jan 14
 
CW beacon active on 437.125MHz
We'll apreciate your TLM report

73 de Nestor
lu7xac@amsat.org

fm LUSAT-1 to STATUS ctl UI pid F0
.....

fm LUSAT-1 to LSTAT ctl UI pid F0
I P:0x3000 o:9 l:12644 f:12644, d:1 st:2
----------------------------------------------------------------------


[With tlmdc4.exe]
----------------------------------------------------------------------
uptime is 534/12:52:30.  Time is Mon Jan 17 02:27:08 2000        LUSAT
Rx D DISC       2.340 k  Rx D S meter 139.000 C  Rx C DISC     4.060 k
Rx C S meter  117.000 C  Rx B DISC      1.806 k  Rx B Smeter 146.000 C
Rx A DISC       4.932 k  Rx A S meter 152.000 C  Rx E/F DISC   1.156 k
Rx E/F S mete 136.000 C  +5 Volt Bus    5.002 V  +5V Rx Cur    0.048 A
+2.5V  VREF     2.506 V  8.5V BUS       8.485 V  IR Detecter  40.000 C
LO Monitor I    0.002 A  +10V Bus      11.176 V  GASFET BiasI  0.003 A
Ground REF      0.000 V  +Z Array V    22.097 V  Rx Temp      -2.113 D
+X (RX) temp   -2.113 D  Bat 1 V        1.377 V  Bat 2V        1.379 V
Bat 3 V         1.398 V  Bat 4 V        1.389 V  Bat 5V        1.412 V
Bat 6 V         1.431 V  Bat 7 V        1.398 V  Bat 8V        1.365 V
Array V        21.612 V  +5V Bus        4.905 V  +8.5V Bus     8.613 V
+10V Bus       11.250 V  BCR Set Poit 131.185 C  BCR Load Cur  0.151 A
+8.5V Bus Cur   0.020 A  +5V Bus Cur    0.178 A  +X Array Cur -0.007 A
-X Array Cur    0.117 A  -Y Array Cur   0.036 A  +Y Array Cur  0.001 A
-Z Array Cur    0.004 A  +Z Array Cur   0.001 A  ExtPower Cur -0.020 A
BCR Input Cur   0.203 A  BCR Output Cur 0.210 A  Bat 1 Temp    1.252 D
Bat 2 Temp      2.374 D  Baseplt Temp   2.374 D  PSK TX RF Out 0.883 W
RC PSK TX Out   0.019 W  PSK TX HPA Tmp 4.618 D  +Y Array Tmp  5.740 D
RC PSK HPA Tm  -0.991 D  RC PSK BP Temp 5.740 D  +Z Array Tmp -4.357 D
LU Bcn Temp A  -0.991 D  LU Bcn Temp D -0.430 D  Coax Rly St 255.000 C
Coax Rly Stat   3.000 C

         Total Array C= 0.158 Bat Ch Cur=0.058 Ifb= 0.045 I+10V= 0.107

TXA:0 TXB:0 TX Pwr:0, BCR:267E                Q=Quit,apace to continue
----------------------------------------------------------------------


参考に、今回使用した各種プログラムの入手先を紹介します。

    wisp3213.exe (gsc.exe v2.03) .... PSKデータ送受信
         http://www.amsat.org/amsat/ftp/software/win32/wisp/

    kiss2asc.zip (kiss2asc.exe) ..... ファイル変換 (kiss -> ascii)
         http://www.amsat.org/amsat/ftpsoft.html

    tlmdc4.zip (tlmdc4.exe) ......... テレメトリデコーダ
         http://www.amsat.org/amsat/ftpsoft.html

    dxterm.exe (v1.38) .............. TNC設定 for DOS/V
         http://www.ne.jp/asahi/hamradio/je9pel/

    clipbrd.exe ..................... クリップボード貼付け (clp)
         c:/windows/

    winct200.lzh (wincatch.exe) ..... 画面キャプチャー (clp -> bmp)
         http://www2.lint.ne.jp/~lrc/de_windisp.htm

    lview31.zip (lview31.exe) ....... 画像ファイル変換 (bmp -> gif)
         ftp://ftp.law.cornell.edu/pub/LII/Cello/ (現在未接続)


《参考》

[Hardware]
Rig  : TS-790S (KENWOOD) ..........144/430MHz
Antn : ZQ-81H  (RAMDA) ............Cubical Quad 8 ele.
       WHS-32N (MASPRO) ...........Yagi 2×20 ele.
Rotr : KR400, KR500A (KENPRO) .....Rotator
       CS232, CX500  (KENPRO) .....Controler
Amp  : GPA-720J (ANTEN) ...........430 PreAmp
Comp : 486DX2/66MHz (VIP) .........DOS/V
       PC-9801nv (NEC) ............Note type
TNC  : TNC-241, TMB-965 (TASCO) ...G3RUH

This "TNC-241" is one for all digital satellites,
such as AO-16, LO-19 (1200bps) and UO-22, KO-25, FO-29,
TO-31, SO-33 (9600bps) etc.
And all mode OK, ie FSK, PSK, JAS, RTTY, AMTOR, CW, FAX.
"TMB-965" is G3RUH outside modem for 9600bps with TNC-241.
But, these TNC-241 and TMB-965(TASCO) may be stop sale.
These new version may be TNC-555(TASCO).


[Software]
Wisp3213.exe (gsc.exe v2.03) ......Satellite Program
       http://www.amsat.org/amsat/ftp/software/win32/wisp/
Tlmdc4.zip (tlmdc4.exe) ...........Telemetry Decorder
       http://www.amsat.org/amsat/ftpsoft.html
Kiss2asc.zip (kiss2asc.exe) .......Convert from kiss to ascii
       http://www.amsat.org/amsat/ftpsoft.html

Firstry you must get 'KISS file' from the satellite with WiSP32.
And you specify this got KISS file name on DOS_PROMPT, then 
'Tlmdc4' will be automatically decoded to the numerical data.
Or you may convert into the ascii from the kiss with 'Kiss2asc'.


 次のページへ移る.

 ホームページ(目次)へ戻る.