Utility program for Logger32

by aki ja1nlx

Utility program          Other files          Logger32 by K4CY          Gallery

What's new

2017/10/16    ClubLogUpload ver3.0  Released  New
2017/10/16    WinKeyMini ver2.03 Released  New  (Minor change in appearance)
2017/10/16    CheckCall ver5.37  Released  New  (Text font selectable in sub window)

2017/09/27    SummaryIOTA ver2.60  Released 
2017/09/22    JTSummary ver1.22  Released  (see note below in Red color) 
2017/09/12    SummaryMini ver4.62  Released (FT8 added as Digital mode) 

Lookup_QRZ_XML, UtilityPlus and WinKeyPlus are running together with Logger32

Tips to use Utility program
1. Utility program must run as Administrator, otherwise it does not work correctly.
2. Most of utility programs looks better if running in Windows XP/SP3 compatible mode and reduced color mode.
3. Please read ReadMe.doc first when you download and unzip.

Download : Click to download the latest version
Testing : Under testing. not released yet

SummaryIOTA  ver2.60   Download
This is recoded version of previous SummaryIOTAMini. It supports new "myqsos.csv" which can be downloaded at new IOTA-Wold page.


JTSummary   ver1.22    Download
This is a utility which read Logbook adif exported by Logger32 and display summary with various Mode. It also show number of worked QSO/DXCC and confirmed QSO/DXCC.

How to use this utility ?
1. Export the latest Logbook in ADIF.Your FT8, JT9, JT65 and T10 QSOs must be logged in Logger32 Logbook.
2. Run JTSummary. When you run JTSummary for the first time, click "Open Logbook ADIF" to select file. When you open JTSummary next time last used Logbook ADIF will be opened automatically. (ver1.22)
3. If you click one of "All time Entities Wkd/Cfmd box then wkd/cfmd DXCC prefix list is displaye.
4. QSL option, QSL and/or LOTW must be checked before you open Logbook ADIF. Once you open Logbook ADIF click "Update" if you check another option. (ver1.22)
5. If mouse is over one of "QSOs Wkd/Cfmd" box then total worked CQZone is displayed. (FT8, JT9, JT65, T10 and Digi_1)  (ver1.22)


SWR/Power Meter for Elecraft W1 ver1.2
This is a utility which works with Elecraft W1 SWR/Power Meter. This program has been coded originally by Elecraft and sorce code is available at Elecraft web page. I am changing code to improve appearance. I do not expect to release this utility, however do not hesitate to send me email if you want to use this utility.


FreqPad+ ver2.01   Download



CheckCallPartial ver1.13     Download
This is a utility program for "super check partial". It is very useful if you use Logger32 in any major contest. Database file can be downloaded

Summary ver1.0     Download
This is utility when you use Logger32 during contest or your DX pedition. It show some “How many QSOs I have worked ?” in real time. It shows QSO/Band/Mode Table, QSOs/Band/Mode chart, QSOs/Band/Continent table, QSOs/Band/Continent chart and CQ Zone chart.

QSOs/Band/Mode table

CQ Zone chart


RegistryEditor for Logger32 ver1.0     Download
This is a tool fow Windows 10 user to change registry setting easily. It provides capability to change following color setteings.
Active Title bar color and text forecolor, Inactive Title bar color and text forecolor, Menu backcolor and text forecolor, Title bar font and Menu font. To use this utility follow steps described in ReadMe. Always make backup of your current registry settings.


Clock ver1.23     Download
Clock is a stand alone utility program. It shows Local time, UTC and memo.  Window’s height and width are adjusted automatically and positioned anywhere.
No document available. Simply run Clock. Small window appears at most top-left. Drag the window anywhere you like. Right click on the window to show menu.

ClubLogUpload ver3.0     Download
This is a utility which upload a QSO on ClubLog everytime you log QSO in Logger32.

WinKey+ ver3.37     Download
WinKeyMini ver2.03     Download
WinKey+ and WinKeyMini work only together with Logger32 and control WinKey device. It has been developed to use mainly during MY DX pedition. However it is good for daily operation for you as well. Please do not ask me to add more features.

  WinKeyPlus WinKeyMini
Function Key (Fx) max 12 max 8
Name field Yes Yes
RST RCVD/SENT field Yes No
<NAME>macro Yes Yes
<NUM>macro No Yes
<ADDx> macro <ADD1>, <ADD2> and <ADD3> <ADD1> and <ADD2>
Contest support No Yes (see Note)
Keyboard sending Yes No
Side tone Yes No
Dupe check Yes Yes

Note: Supported contest are ARRL DX (DX or VE/W), CQ WW, CQ WPX and IOTA




CheckIOTAPlus ver3.75     Download
When callsign/IOTA are entered (manual or clicking DX spot) in Logbook entry window it shows “New”, “Not confirmed”, “Worked” and current total IOTAs workd in a small window..
When DX spot come and IOTA reference number is populated by comment then
1) it shows “New” or “Not confirmed” and
2) it shows all IOTA spots in the table with “G” (granted),
“S” (submitted), “NC” (not confirmed and “!” (New) mark. CheckIOTAPLus check IOTA only for QSO on HF Bands (IOTA standard award). IOTA rule has been changed since Jan 2016.

DupeCheck ver2.43     Download
This utility is useful for contesting and daily logging with Logger32 and provides you “Worked before” message and sound alarm. You have many options in this utility, message appearance and dupe check options (call, call/Band and call/Band/Mode).
This utility does not check previous QSOs in Logger32 Logbook but check internal text file. QSO info (callsign, Band and Mode) is written in internal text file and saved as DupeCheck.txt in the folder when QSO is logged in Logger32.  Data format is like JA1NLX 20M CW

DupeCheck will start when callsign field in Logbook entry window is changed by manual entry or clicking DX spot. You see “xxx New”, “xxx Worked”, “xxx new this Band”, “xxx worked this Band” , “xxx new this Band/Mode”,  “xxx worked this Band/Mode” on message area.
Right click on message area to show menu.

No document available for this program Please follow steps below.
1) Download DupeCheck.zip.
2) Make DupeCheck folder.
3) Unzip DupeCheck.zip and copy DupeCheck.erxe in DupeCheck folder.
4) Set DupeCheck.exe to run as Administrator.
5) Run DupeCheck
6) If you do not use DupeCheck daily then skip next step 7)
7) If you want to use DupeCheck daily then export Logbook in ADIF. Right click on the window, click File and Create CupeCheck.txt.
8) Ready to go.
9) If you like check your favourite option.



BandPlan2 ver2.0     Download
BandPlanMini2 ver2.01    Download
It works only together with Logger32.  It shows corresponded BandPlan bmp picture when Band is changed (BMP pictures are created by Steve W6SFK. Thanks Steve).
The Band width is 500KHz for BandPlan2 and 250KHz for BandPlanMini2.

Radio Freq/Mode are changed when clicking on the picture. Mode is derived from Band/Mode table in Logger32.
It shows tuning bar (vertical red line) on the picture.



Following BMP file sets are available.

For BandPlan2 (500KHz)
ARRL BMP set     Download
IARU Region 1 BMP set     Download
IARU Region 2 BMP set     Download
IARU Region 3 BMP set      Download
JARL BMP set     Download

For BandPlanMini2 (250KHz)
ARRL BMP set     Download

IARU Region 1 BMP set     Download
IARU Region 2 BMP set     Download
IARU Region 3 BMP set     Download
JARL BMP set     Download

As no document is available please follow steps below.

<How to install>
1) Unzip downloaded zip file (BandPlan2 or BandPlanMini2). You have BandPlan2.exe (or BandPlanMini2.exe).
2) Make BandPlan2 folder (or BandPlanMini2 folder) anywhere you prefer. Copy BandPlan2.exe (or BandPlanMini2.exe) in the folder.
3) Unzip downloaded zip file (one of BMP set). You have BMP folder (contains 160.bmp, 80a.bmp, 80b.bmp etc). Copy BMP folder in the BandPlan2 folder (or BandPlanMini2 folder) 

<How to run BandPlan>
It should read BandPlanMini2 below if you install BandPlanMini2.
1) Configure BandPlan2.exe as one of utility program to run from Utility menu in Logger32
a. On the Logger32 Menu Bar select: Tools/Utility Program Setup to open the Utility Program menu setup window.
b. On an available line enter the item BandPlan and with the Browse button on the right go to the Logger32 folder, open the BandPlan folder then click the BandPlan2.exe file to set the link.
c. If you want the BandPlan utility to autostart, check the box to the left on the BandPlan item line then select Apply.
2) Run BandPlan2. You will find the BandPlan2 window at the top left of your screen.
3) Resize the window to view the entire map then drag to any location on your screen.
4) Right click the BandPlan2 right side bar and you can select the font style, font size, title bar color and freq format
5) Click “X” to close BandPlan2.

<How to use BandPlan2>
It should read BandPlanMini2 below if you install BandPlanMini2.
1) Run BandPlan2.
2) The BandPlan2 window should now display the current radio frequency. Mouse click anywhere on the BandMap2. The radio will change to that frequency and mode. If you click an out of band location on the BandMap2 you will get a "Not supported frequency" message. It is very important that you have edited your Logger32 Bands and Modes database for your QTH.
On the Logger32 Menu Bar select: Tools/Setup Bands & Modes. Here you may edit the Bands, Modes and frequency limits for your QTH. Refer to the Logger32 Help Files. When you tune the radio frequency the BandPlan map will automatically change to the correct map when you reach an active band listed in your Bands & Modes database.


CallsignLookup utility
Following programs are available.
Each utility works together with Logger32 ver3.45.0 and after. It does not work as stand-alone. Please read ReadMe.doc in each package first before you use.

Lookup_QRZ_XML ver.3.14     Download
QRZ XML service is not free. You need to subscribe to this service.

Lookup_HamQTH_XML ver1.98     Download
HamQTH XML service is free, however you must be registered. This is much faster than their ADIF service.

Lookup_HamQTH_ADIF ver1.95     Download
HamQTH ADIF service is free, however you must be registered.


CheckCall ver5.37     Download


CheckColor ver2.42     Download
CheckColor is an external program which reads Logger32.ini (or your ini) and shows a color box for most of highlight/background color you configure.
As you know Logger32 provides many choices of highlight/background color. Can you always understand what each color means when you see the Logbook Page Window, Award Table or DX Spot Window, etc? Probably not. This will help you!



CheckSpotPlus ver1.50     Testing
 It shows DX spots received from Logger32 and shows reference number and different backcolor for IOTA, RDA, WWFF and DME award in column “Plus”
It is not easy to populate reference number while reading comment. There are many patterns you type reference number. This is not 100%, however I think 80% will be OK.

It shows IOTA accepted status in column “A” (Y: accepted, N: not accepted, empty: not added in IOTA database)  You must download your myqsos.csv and copy it in CheckSpotPlus folder to use this feature.
It shows “not valid for DXCC” as “X” in “X” column.  Column “Comment” can be hidden.  Each column width can be adjusted and restored at re-start.



CheckSpot ver2.68     Download
CheckSpot is useful to check how the callsign you are interested has been spotted. (Freq ? Mode ? and Time ?)  It works ONLY together with Logger32 (after ver 3.35.0)

SummaryMini ver4.62     Download
SummayMini reads Logbook ADIF exported by Logger32 and simply shows following Table and Chart by all operators or each operator.
QSO/Band/Mode table, QSO/Band/Mode chart, QSO/Band/Continent table, QSO/Band/Continent chart, Award table, Summary by selected operator table and Summary by selected year table.
Chart may not work at all with Windows 7 , 8 and 10 system. This happens when VB run-time files has not been installed properly in the system.
Mschart20.ocx is attached in the package. This may fix the problem. Please email me if you are interested. I will send you program for your test.

QSO/Band/Mode table

Award table


Other files for Logger32

JCC_20161010.csv by JH1GUO      Download

JCG_20120401.csv by JH1GUO    Download

TelnetAddresses.ini     Download