Link page

This is a link page to my friends, acquaintances, and so on. Sorry, I abbreviated their prefix.

Notice: Almost, these pages are Japanese only. If you don't read Japanese or don't have Japanese font, you can't look the site.
participant at KIT(Kyushu Institute of Technology)

~hisato
His graduation is same with me. He is a Tom & Jerry freak, and likes short cut hair girls. :-)
He has a pollinosis, then he is always sleepy when medicine strongs to him.

nibbles' room
Her graduation is 1 year after from me. She is above Hisato's wife. She likes breads matchless.
Her son becomes mania of train, take over her teacher. ;-)

login: tamaoka
His graduation is same with me. Recently, he works so hard. Then update was often ceased.
And he became father of two children. He became busy, too.

Akitsu's Home
She is above tamaoka's wife. She is his colleague.
Indeed, She is so busy of parenting, then the site was creased now. Fight! ;-)

PROGRAMMER FASHION...
His graduation is 1 year after from me. He became free programmer, then becomes very busy or very free.
... but why the update was stopped from A.D.2000 ...?

certain days of the Nitta family
His entrance to KIT is same with me. I took part in his wedding, and I got his mail means 'I establish my site'.
Then I visit his site, his wife is pregnant. ... The calculation of gestation period was balanced ... just to make sure ...
He has strong likes and dislikes about food, then his wife is poor. :-(

News agency of tinker
His entrance to KIT is same with me. He travels anywhere anytime. But update frequency is low.

Yodel TABE-HOUDAI(means, eat as much as you like) by Kazuya Mera
His graduation is 1 year after from me. He is a gamer and bowler, but he became busy of his work, then he can't bowl anytime.
... He was looked to hounded down not physically but morally ... ;-(


be interested in HP200LX(Hulet Packerd)

Digiyama's HomePage
He is very famous at limited field.
I don't know the fact, then I was surprised when I knew the fact.
I can't meet to him easily certain conditions, I feel lonely.
I think, he became so hard, the site was creased now.


be interested in Mobile-Gear(NEC)

SUZUDEN HOMEPAGE
He tries some test of Mobile-Gear.
Especially, the site has some informations of connect to internet, connect by PPP, bobcat (Text browser), e-mail, FTP, and so on.
If you want to connect to internet by Mobile-Gear, I advise to you to look this site.


be interested in PC-98x1(NEC)

Ken Takata's Web Page
There are some informations of PC-98x1 series note PC. And solid of links, too. The said person tries replacement of Hard-Disk-Drive, expanded of Memory, and Clock-up (Every tries are out of indemnity. ;-)
I got some informations of the HDD-size wall, and how to over the HDD-size wall.


My favorite shop

WASHIYA
The shop specialize in TV games, Trading cards, and so on.
I often use when I commute from my parent's home to corpotarion. But recently, I don't visit there cause I move apartments or the move's trouble.
Someday, I visit there to chat. ;-)

Ele-studio SAKURAI
The shop specialize in Electronic parts, assembly kit, and so on. I want to get a circuit to up voltage, I searched and found there at the WWW.
The shop's correspondence is very politely, then I dealed with the shop to easy in my mind.

Cutlery market (Hamono-Ichiba)
They sell various cutlery in this Japanese site.
I met this site when I look for 'Namikko-II' that can cuts ripple mark. Of course, there are huge various cutlery, then you can find on your order. But I think, they can be ordered in Japanese only.

Postage is free in Japan, and you can use credit card, then you can buy so easily.

Niigata precision instruments
They sell various measurement instruments in this site.
I met this site when I look for Height-Gauge, they attend to me so quickly and kindness. They answer intelligible for my amateurish questions, then they relieve me. I feel, their supports are strongly.
Of course, I don't know the measurement fields, then I can't understand almost at the site's instruments.

But I think, they can be ordered in Japanese only, too.

MUTOU SHOUJI
They sell the Plarepair and KATADORI-KUN.
Those two are famous material in plastic model world. Plarepair is formative glue, and KATADORI-KUN is duplicate mold material.

Duplication is so easy by the two. And the two material can be bought at the site. But there is Japanese only. Sorry.

By the way, the Plarepair's solvent has so bad smell. X-(

Tool town (TOUBU DENDOUKI corporation)
The site sells some tools rendered by the site's name.
Of course, tools are fully, but there are many spare options. There are many kinds of tools, and written some details for help.

I ask a hole-saw's question to the site's master, he reply so kindness and quickly, then I bought it at there.

Office K & J
I found the site when I search some cutting sheets.
They sells 1m pieces of some cutting sheets. The cutting sheets are some color variations, and can check rough color image in computer display.

I select the flat Lumical-Color, it is tough against scratch.
I can select almost color on the display, but I can't select only orange, finally I select from real catalogue.

I selected following 6 colors.
White:N-9113
Red:R-204
Yellow:Y-101
Blue:B-301
Green:G-401
OrangeYR-502
By the way, I try the Lumical-Royal's orange. It is gloss and fine color, but it weaks by scratch. Then I select to Lumical-Color.

Daicelfinechem corporation
The company makes and sells Free plastics.
Free plastics can't be used to puzzle's finish cause it weaks high temperatures. (From about 60 degrees centigrades)
But this material can be used to trial.
But the material can be united to ABS resin, then you think to removable the Free plastics.

Caramel YOKOCHOU
The site sells only cheap sweets.
You'll think 'Why the shop is here?', but I bought the cheap mini cube sets at there.
The cube was named '6 sided puzzle', but it sells 1075 yen that set includes 25 cubes. The real 'Rubik mini cube' was sold about $5, then the puzzle is low cost.

Only its problems are 'need to peel the stickers', 'parts are so tight', and 'one corner parts has a hole by attached keychain'.
But there is no problem to use inner cube, and tightness can be adjusted by polish.

By the way, I don't meet normal size (5.5cm) cube's cheap and ABS resin variation.

Odd material shop
I found the site when I'm looking for some ABS resin plate.
The site sells some plates or pipes made by Acrylic, Vinyl chloride, ABS resin, and so on.

I bought a black 1mm-thickness ABS resin plate. Its size is so large, width is 1000mm and height is 2000mm. Then I order to cut to 400mm x 500mm x 10 plates.
I transmit and receive some e-mails, site master answered very carefully. Then I purchased in comfort.

Now, I can't use all of 1st plate only use to remodel the puzzle. ;-)

Nakatomi Corporation
The company makes some machine tools, and my band-saw's maker.

My band-saw is BS-150 (Japanese only). The tool's size is so small, and a little quietly. Then it was so much to make some puzzles personally.

The band-saw has a little problem. Its spare blade can't be bought easily.

Corporation Asai-Seisakusho
I found the site when I was looking forward any screw to reinforce mini cubes.
The operater is so kindness, and quickly shipment, then I have profited his supports.
I use two type screw, "pan head screw 1.6 x 14 mm galvanized" and "pan head screw 1.7 x 17mm nickel".
Former screw is just for corner part's corner to inside. And latter screw is strong, then it can be used to connect outer part and inner part.

He sells from 200 to 100 pieces step.
When I use it to corner, it is needed 8, then if I bought 200, I can only use for 25 mini cubes. ;)


be interested in some solid puzzles

(means, Room of Solid puzzle)
I found there when I interest the solid puzzle again. I hope to link and suggest to him, he gives his willing consent to link.
The site introduses many solid puzzles.

(3D puzzle reconstruction studio)
I found there when I interest the solid puzzle again, too.

The site is not solves or sells, but remodeling from existed puzzles. Then you look the puzzle at different viewpoint.
There are some informations of existed puzzle's structures, it's so interest.

(means, Labyrinth of solid puzzle)
The site introduces speed-cubing (How to solve as fast as you can), and some solutions of 3x3x3 cube.
I got an e-mail from the other party to link to my site, then I linked to his site, too.

I'm surprised everytime when I watch the solving video, I admire to solve it in tens seconds.
If you can't solve the 3x3x3 cube, I advise to you to look the site.

In this connection, I can solve it barely. Of course, I can't solve it in tens seconds. ;-)

Puzzle shop TORITO
This site deals in a variety of puzzles, not only Rubik style but also slidings, binary arts, and so on.
Sorry, this site's mail order is only in Japan.

Home
I met at TWISTY-PUZZLES.COM's folum, _pink's site. Of course, '_pink' is his handle name.
There are so many Know-How about remodeling, and the site is massive of puzzle's structures.

By way of parenthesis, this is my first mutual link for foreigner. ;-)

MEFFERT'S.COM
It is Uwe Meffert's site, he is the father of Skewb cube and so on.

The site can be used VISA-card or Pay-Pal, and postage is free. If you have some interest in the site's cube, you will try to buy it.

TWISTY-PUZZLES.COM
In this site, many kinds cube are ordered likes dictionary. If you want to check your cube is new, you check here at first.

I look there only, but I got an e-mail means 'I linked your page from (Features->)Articles'. Then I linked too.
The linked page's main is building (How to), then linked my 'Dodeca-Master (Dodecahedron of 4x4x4)' page.

e-mail to Getchan(Hidetoshi,T)
Go to the top page