| Model | Honda VT250F(E) | |
| Frame No. | MC08-1000001- | |
| Engine Model | MC08E | |
| Deal since | 1984.2 | |
| Dimensions | Overall Length | 2015mm |
| Overall width | 730mm | |
| Overall height | 1155mm | |
| Seat height | 765mm | |
| Wheelbase | 1385mm | |
| Minimum road clearance | 140mm | |
| Weight | Dry | 152kg |
| With oil and full fuel tank | 167kg | |
| (Front) | 81kg | |
| (Rear) | 86kg | |
| With passengers | 277kg | |
| (Front) | 101kg | |
| (Rear) | 176kg | |
| Seating capacity | 2 | |
| Performance | Minimum turning radius | 2700mm |
| Stop length | 14.0m(50km/h) | |
| Engine | Type | 4 stroke, gasoline, liquid-cooled, DOHC |
| Cylinder | 2-cylinder, V-twin type | |
| Displacement | 248cm^3 | |
| Bore x stroke | 60.0mm x 44.0mm | |
| Comression ratio | 11.0 | |
| Comression pressure | 13.0kg/cm^2 - 700rpm | |
| Horsepower | 40PS/12500r.p.m. | |
| Torque | 2.3kg-m/11000r.p.m. | |
| Air cleaner | Dry filter type | |
| Clutch type | Wet, multiple-disk | |
| Gear box type | Constant mesh, 6-speed forward | |
| Starting System | Electric starter | |
| Ignition System | Battery ignition (Full transistor ignition) | |
| Chassis | Frame type | Double cradol |
| Caster | 26¡20' | |
| Trail | 97mm | |
| Angle | Each 35¡ | |
| Fuel tank capacity | 14L | |
| Braking system: Front | Inboad disk brake/Right hand operation | |
| Braking system: Rear | Drum brake/Left foot operation | |
| Suspension: Front | Telescopic fork | |
| Suspension: Rear | Swing arm | |
| Tire size: Front | 100/90-16 54S | |
| Tire size: Rear | 110/90-17 60S | |
| Gear | Primary reduction ratio | 2.821 |
| Ratio/td> | Fiest 2.562 Second 1.850 Third 1.478 Fourth 1.240 Fifth 1.074 Sixth 0.965 |
|
| Secondary reduction ratio | 3.214 | |
| Engine oil quantity | 2500cm^3 | |
| Carburetor | Type | VD6 |
| Idling | 1300r.p.m. | |
| Gas valve diameter | 32mm | |
| Bentury | 30mm | |
| Tire air pressure | Front 2.25kg/cm^2 Rear 2.50kg/cm^2 |
|
| Battery capacity | 12V9Ah | |
| Ignition timing | BTDC13/1300r.p.m. | |
| Spark plug | Type | NGK DP8EA-9,DP9EA-9 Nippon Denso X24EP-U9,X27EP-U9 |
| Gap | 0.8-0.9mm | |
| Valve system | Clearance | IN (cool) 0.11mm EX (cool) 0.15mm |
go to HONDA VT250F Page
go to Tohma's Top menu