ASRTU-1(AO-123) gnuradio on Windows
● (No.1163) ASRTU-1(AO-123) gnuradio on Windows (2024年11月29日)
---------------------------------------------------------------
Launch: 4 Nov 2024
Up: 145.850/145.875MHz
Down: 435.400/436.210/10460.000MHz
9k6_BPSK NBFM QSPK/FM, RS64S BJ2CR
--------------------------------------------------------------
[Re-post from ANS-329] ASRTU-1 Designated ASRTU-OSCAR 123
At the request of Harbin Institute of Technology(Chaina) and Amur State
University(Russia), AMSAT has designated ASRTU-1 as ASRTU-OSCAR 123 (AO-123).
Illustration of AO-123 (Credit: http://nanosats.eu)
ASRTU-1 was launched on November 4, 2024 at 23:18 UTC, on a Soyuz launch
vehicle from Vostochny Cosmodrome, Russia. Built and operated by Harbin
Institute of Technology and Amur State University, the satellite carries a
V/U repeater, UHF SSDV digital image transmitter, and a 10.5 GHz QPSK image
transmitter. All of these payloads have been successfully tested, and the
repeater has been operational for QSOs.
The satellite contains an FM transponder, which is currently operational,
with an uplink of 145.850 MHz (67 Hz CTCSS tone required) and a downlink of
435.400 MHz. After the repeater detects the end of uplink, it will wait for
0.5s. If no new uplink in 0.5s, telemetry will be sent. So make fast QSOs
so the telemetry is less like to interrupt you.
The satellite also contains two cameras with an SSDV downlink for low
resolution images on 436.210 MHz, and a high speed downlink on 10.460 GHz
for high resolution images.
Windows software for decoding telemetry is available at
https://drive.google.com/file/d/1W8nm-P0_h0J1Bd1eif74mLo-EuRdWcjH
Two-Line Keplerian elements (TLEs) may be found at
http://asrtu.mqsi.xyz/ASRTU_TLE.txt
AMSAT congratulates the Harbin Institute of Technology and Amur State
University, thanks them for their contribution to the amateur satellite
community, and wishes them continued success on this and future projects.
[ANS thanks Drew Glasbrenner, KO4MA, OSCAR Number Administrator, for the
above information]
----------------------------------------------------------------------------
[Re-post from ANS-315] ASRTU-1 Satellite With FM Transponder Launched
On November 4, 2024 at 23:18 UTC, a Soyuz rocket launched from Vostochny
with at least 17 satellites using amateur satellite service frequencies.
Among those launched was ASRTU-1, a 12U CubeSat designed by Russian and
Chinese students and developed by the Harbin Institute of Technology in
Harbin, China, for education and amateur radio.
The satellite contains an FM transponder, which is currently operational,
with an uplink of 145.850 MHz (67 Hz CTCSS tone required) and a downlink of
435.400 MHz. After the repeater detects the end of uplink, it will wait for
0.5s. If no new uplink in 0.5s, telemetry will be sent. So make fast QSOs
so the telemetry is less like to interrupt you.
The satellite also contains two cameras with an SSDV downlink for low
resolution images on 436.210 MHz, and a high speed downlink on 10460.00 MHz
for high resolution images.
On November 7, 2024, the camera system was tested for the first time. N6RFM
uplinked the command and the image was downloaded by Chinese stations using
the UHF SSDV downlink.
Windows software for decoding telemetry is available at
https://drive.google.com/file/d/1W8nm-P0_h0J1Bd1eif74mLo-EuRdWcjH
A Live ISO Linux image is also available for telemetry at
https://drive.google.com/drive/folders/1T6GMNnDNEEavckoe4oPXPIU_SPFXLDd4
A Telegram group has been created for discussing the satellite:
https://t.me/+I5NTtX7eAJA4ZDVl
[ANS thanks BG2BHC, the IARU, and AMSAT-F for the above information]
---------------------------------------------------------------------
[readme_en.txt in "gnuradio_asrtu_win_20241104a"]
1. Install zadig-2.9.exe
→zadig-2.9.exe をインストール。
2. Download and install Radioconda from: here
→Radioconda をダウンロードしてインストール。
3. Unzip patch_gr-lilacsat_gr-dslwp.zip to Radioconda install path
→patch_gr-lilacsat_gr-dslwp.zip を、radioconda インストールフォルダに解凍。
4. Unzip proxy_mmt_gui.zip in config.cfg to set proxy_nickname,
and proxy_long, proxy_lat and proxy_alt run proxy_mmt_gui.exe
→proxy_mmt_gui.zip を解凍し、config.cfg 内の独自のコール サインと緯度経度
(proxy_nickname、proxy_long、proxy_lat、proxy_alt) を変更し、
proxy_mmt_gui.exe を実行。
5. Connect USB audio cable or RTLSDR to your PC
→USBオーディオケーブルまたはRTLSDRを、PCに接続。
6. Run GNU Radio Companion from start menu
→[スタート] メニューから、GNU Radio Companion を実行
7. Edit grc file →grcファイルを編集。
If you use RTLSDR with demod_asrtu-1_rtlsdr.grc, double click
on Plan13 CC block to set latitude, longtitude and altitude.
The software will compensate doppler automaticly.
Pay attention to frequency offset and gain of RTLSDR.
If you use a radio with USB IF with demod_asrtu-1_audio.grc,
select correct audio input device in your system audio config,
and use a extern software to compensate doppler.
→"demod_asrtu-1_rtlsdr.grc" を使用する場合は、Plan13 CC ブロック上で
独自の緯度経度に変更する。ソフトウェアはドップラーを自動的に補正する。
RTLSDR の周波数オフセットとゲインに注意する。
"demod_asrtu-1_audio.grc" を使用する場合は、USB IF を備えた無線機を
使用する場合は、システムのオーディオ設定で正しいオーディオ入力デバ
イスを選択し、外部ソフトウェアを使用してドップラーを補正する。
8. Run grc and start receiving ASRTU-1!
→ grc を実行し、ASRTU-1 の受信を開始する。
https://blog.goo.ne.jp/je1cvl/d/20241205
https://blog.goo.ne.jp/je1cvl/d/20241206
http://1.92.100.130/pages/telemetry-asrtu.html
(参考)
"gr-satellites" for ASRTU-1 on Linux, 4 Dec2024
> Download and Extract "gr-satellites-main.zip" from GitHub
$ cd ~/gr-satellites/gr-satellites-main
$ mkdir build
$ cd build
$ cmake ..
$ make
$ sudo make install
$ sudo ldconfig
"gr-lilacsat" for ASRTU-1 on Linux, 7 Dec 2024
Compile Error of "proxy_mmt_gui.c" in
"gr-lilacsat" - "gr-lilacsat-master" - examples - ASRTU-1 - "proxy_mmt_gui"
# To compile
$ sudo apt-get install libwebsockets-dev
$ sudo apt-get install libconfig-dev
$ sudo apt-get install libcjson-dev
$ sudo apt-get install libncurses-dev
$ gcc proxy_mmt_gui.c -o proxy_mmt_gui -lncurses -lzmq -lwebsockets -lconfig -lcjson
ASRTU-1 Uplink FM
(67 Hz CTCSS)Downlink FM Comments ASRTU-1 145.850 MHz 435.400 MHz In orbit, commissioning Also downlinks on 436.210 MHz, 10460.00 MHz. Download Live CD for telemetry decoding.
トップ へ戻る．
前のページ へ戻る．
次のページ へ移る．
ホームページ(目次) へ戻る．