次のページへ移る．
How to use "WiSP-TLM" with WiSP32
● (No.171) How to use "WiSP-TLM" with WiSP32 (May 18, 2000)
-------------------------------------------------------------
This is a bulletin to amsat-bb wrote by JE9PEL/1, Mineo Wakita.
=================================
How to use "WiSP-TLM" with WiSP32
=================================
This "WiSP-TLM" is the program to decode the satellite degital signals
with "WiSP16". And you can use also it in "WiSP32" by the next way.
For example KO-25;
(1) Save "wisp.ini" used for WiSP16 in "C:/windows".
(2) Copy "wisp-tlm.exe", "kitsat2.cfg", "kitsat2.pag" in "C:/wisp".
(3) GSC - Setup - Programs - Menu Title - "Wisp-Tlm"
Startup Directory - "C:/wisp"
Program Name - "wisp-tlm.exe"
(4) GSC - Setup - Satellite Setup - "KO-25" - Edit -
- General - TLM Config File - "C:/wisp/kitsat2.cfg"
(5) GSC - Setup - Satellite Setup - "KO-25" - Edit -
- MSPE Settings - General - (Check)LOG Telemetry frames
(6) GSC - Programs - "Wisp-Tlm" - Telemetry - Select Satellite -
- "KO-25" - Telemetry - Playback File - "KO-25" -
- (ex.)"99426k25.tlm" - Window - Communications - Telemetry - Play
Computer Forward
Power
Temperature
Navigation
About "wisp.ini" in the above (1),
You need to install firstly WiSP16 (in Windows3.1), and GSC will
generate automatically "wisp.ini" after several satellite settings.
You install secondly WiSP32 (in Windows95) after WiSP16's deletion,
and you must do the same satellite settings in GSC(WiSP32). Please
you put this "wisp.ini" file in C:\windows.
Then GSC(WiSP32) will recognize "wisp-tlm.exe" in the above (3).
If you want to add new satellites, please edit in this "wisp.ini".
Example, please put the following 4 files in the next directory.
This "99426k25.tlm" was the telemetry file that I get from KO-25
at 26-Apr 1999, 02:13-02:20z.
wisp.ini ....... C:/windows
kitsat2.cfg .... C:/wisp (for KO-25)
kitsat2.pag .... C:/wisp (for KO-25)
99426k25.tlm ... C:/wisp/KO-25 (sample)
CF1.[Setup for KO-25]
GSC - Setup - Programs - Menu Title - "Wisp-Tlm"
Startup Directory - "C:/wisp"
Program Name - "wisp-tlm.exe"
GSC - Setup - Satellite Setup - "KO-25" - Edit -
- General - TLM Config File - "C:/wisp/kitsat2.cfg"
GSC - Programs - "Wisp-Tlm" - Telemetry - Select Satellite -
- "KO-25" - Telemetry - Playback File - "KO-25" -
- "99426k25.tlm" - Window - Communications - Telemetry - Play
Computer Forward
Power
Temperature
Navigation
You can get "wisp-tlm.zip" file on the next web, and you will find
cfg files for other satellites in this extracted file.
And you can get the updated "WiSP3215" program on the next ftp.
http://www.ee.surrey.ac.uk/CSER/UOSAT/amateur/software/wisp.html
ftp://ftp.amsat.org/amsat/software/win32/wisp/
'Wisp-tlm.exe' is a program for 'UO-22, KO-23, KO-25, TO-31, UO-36'
on WiSP32. Please refer 'WiSP how to install' and 'CFG file link'
in my home page below.
For 'AO-16, LO-19', you are in need of 'tlmdc4.exe'.
tlmdc4.zip (tlmdc4.exe) ......... Telemetry Decorder
http://www.amsat.org/amsat/ftpsoft.html
And you must get 'KISS file' befor the fact from the satellite
with WiSP32. Firstly check the followings setup in 'GSC'.
GSC - Setup - Satellite Setup - LO-19 - Edit -
- MSPE Settings - Log Kiss frames
Log telemetry frames - OK
(again)- MSPE Settings - Log Kiss frames
Log telemetry frames - OK
And you specify this got KISS file name on DOS_PROMPT.
Then it will be automatically decoded to the numerical data.
Tlmdc4 - F(Decode File) - Input raw data file to read: *.kss
CF2.[Configuration file]
Uo5tlm.cfg for UO-22
Kitsat1.cfg for KO-23
Kitsat2.cfg for KO-25 are in wisp-tlm.zip on the following web;
http://www.ee.surrey.ac.uk/CSER/UOSAT/amateur/software/wisp.html
Tmsat1.cfg for TO-31 is on the following web;
http://www.ee.surrey.ac.uk/CSER/UOSAT/amateur/tmsat/
Uo12obc.cfg for UO-36 is in uo12tlm.zip on the following web;
http://www.ee.surrey.ac.uk/CSER/UOSAT/amateur/uosat-12/
CF3.[Wisp.ini]
Sample file;
http://www.ne.jp/asahi/hamradio/je9pel/wisp-ini.htm
CF4.[Analysis for KO-25]
http://www.ne.jp/asahi/hamradio/je9pel/ko25tlme.htm
CF5.[Mails on Realtime]
Date: Tue, 09 May 2000 22:13:12 +0000
Subject: Re: WISP-TLM
From: Roy Welch [rdwelch@swbell.net]
Cc: "'amsat-bb@amsat.org'" [amsat-bb@amsat.org]
WISP-TLM is not compatible with WiSP32.
Bill Hurlock wrote:
>
> Does anyone know what the status of WISP-TLM is? I tried to install
> and use it but it doesn't seem to work . I was able to get it to
> come up on the screen but it doesn't seem to talk to MSPE. I noticed
> it wasn't in the WISP32.zip file from AMSAT. Also some help on the
> EQ files would be great.
>
> 73 wa2tqi bill
>
--
73, Roy
Internet: w0sl@amsat.org
Home Page: http://home.swbell.net/rdwelch
----
Date: Wed, 10 May 2000
Subject: Re: WISP-TLM
From: "M. Wakita" [je9pel@jamsat.or.jp]
To: amsat-bb@amsat.org
WISP-TLM is not compatible with WiSP32.
But you can work it in WiSP32 by the technique.
Please refer the more information in the below web.
http://www.ne.jp/asahi/hamradio/je9pel/wisptlme.htm
----
Date: Wed, 10 May 2000 22:24:19 EDT
Subject: Re: WISP-TLM
From: K1uxbMa@cs.com
To: je9pel@jamsat.or.jp, bill@hurlock.net
CC: amsat-bb@amsat.org
In a message dated 5/10/00 7:41:36 AM Eastern Daylight Time,
je9pel@jamsat.or.jp writes:
[[ http://www.ne.jp/asahi/hamradio/je9pel/wisptlme.htm ]]
>About "wisp.ini" in the above (1),
>You need to install firstly WiSP16 (in Windows3.1), and GSC will
>generate automatically "wisp.ini" after several satellite settings.
Thank you for the info but I Never Had "WiSP16",I started with Wisp32.
>You install secondly WiSP32 (in Windows95) after WiSP16's deletion,
>and you must do the same satellite settings in GSC(WiSP32). Please
>you put this "wisp.ini" file in C:\windows.
Since WiSP16 is not on Amsat site maybe you could sent a copy of
"wisp.ini" then I'll just edit file and insert into C:\windows (98se),
as you suggest.
>Then GSC(WiSP32) will recognize "wisp-tlm.exe" in the above (3).
>If you want to add new satellites, please edit in this "wisp.ini".
73
Nick_ K1uxb
AmSat M#22708
----
Date: Fri, 12 May 2000 10:30:31 EDT
Subject: wisp-tlm.exe with WiSP32
From: Reinricht@aol.com
To: je9pel@jamsat.or.jp
Hello Mineo,
I have read your very interesting message in AMSAT-BB and on your
homepage about using WiSP-tlm.exe with WiSP32. I would like to make a
translation for the next issue of our AMSAT-DL Journal and hope that
you have no objections.
I am also active on the digital sats but have not experimented much
with telemetry decoding. Now I followed your instructions on the
example of KO-25 and I have succeeded to get the system working. But
only one exeption. I understood that wisp-tlm.exe can decode telemetry
in realtime. When I am receiving the satellite and open wisp-tlm.exe
and click on 'Telemetry' and then 'Select Satellite' I then select
KO-25. Then again I click on 'Telemetry' and then on 'Live from MSPE'.
Nothing happens. When I then click on 'Play' immediately an error
message pops up and I have to close the program. In other words I can
only decode telemetry from a file but not in realtime. Can you give me
any additional advise?
73 from EXPO2000 city Hannover
Reinhard, DJ1KM@amsat.org
----
Date: Sat, 13 May 2000
Subject: wisp-tlm.exe with WiSP32
From: "M. Wakita" [je9pel@jamsat.or.jp]
To: DJ1KM@amsat.org
Hello Reinhard,
Yes I shall be glad to help printing in AMSAT-DL Jounal.
Would you please sending me that your Jounal printing my messages ?
I rewrote yesterday a few messages in my below HomePage.
http://www.ne.jp/asahi/hamradio/je9pel/wisptlme.htm
http://www.ne.jp/asahi/hamradio/je9pel/ko25tlme.htm
http://www.ne.jp/asahi/hamradio/je9pel/configur.htm
http://www.ne.jp/asahi/hamradio/je9pel/wisp-ini.htm
Well, I considered that the telemetry analysis was worth after
getting as a file, so I made many experiments in that way long ago.
> When I click on 'Telemetry' and then on 'Live from MSPE',
> nothing happens. And when I then click on 'Play' immediately an
> error message pops up.
I think also this is a program bug. I intend to try these 'realtime'
experimentations after tomorrow.
----
Date: Sat, 13 May 2000 04:00:06 EDT
Subject: Re: wisp-tlm.exe with WiSP32
From: Reinricht@aol.com
To: je9pel@jamsat.or.jp
Hello Mineo,
[[ Yes I shall be glad to help printing in AMSAT-DL Jounal.
Would you please sending me that your Jounal printing my messages ?]]
For sure I will send you a copy
[[ http://www.ne.jp/asahi/hamradio/je9pel/wisptlme.htm
http://www.ne.jp/asahi/hamradio/je9pel/ko25tlme.htm
http://www.ne.jp/asahi/hamradio/je9pel/configur.htm
http://www.ne.jp/asahi/hamradio/je9pel/wisp-ini.htm ]]
I have checked them all already
[[ I think also this is a program bug. I intend to try these
'realtime' experimentations after tomorrow. ]]
I look forward for your findings because realtime decoding is the most
interesting feature. Decoding from a file is also possible with other
programs.
73
Reinhard
----
Date: Sun, 14 May 2000
Subject: WiSP-TLM for KO-23 with WiSP3215
From: "M. Wakita" [je9pel@jamsat.or.jp]
To: DJ1KM@amsat.org,Reinricht@aol.com,K1uxbMa@cs.com
Cc: c.jackson@eim.surrey.ac.uk,w0sl@amsat.org
Today, 14 May 2000, I attempted to test 'WiSP-TLM realtime'
experimentations for KO-23 with WiSP3215. I confirmed that
'WiSP-TLM' could decode only after receiving as a telemetry file
not 'realtime'.
Whenever I click on 'Telemetry' and then on 'Live from MSPE',
nothing happens. And when I then click on 'Play' immediately an
error message pops up. This is a certain fact, so I think this
may be a program bug. Although 'WISP-TLM' is not compatible with
WiSP32, we can decode only after received file as the next way.
(1) Save "wisp.ini" on "C:/windows" in Windows95(WiSP32).
(2) Copy "wisp-tlm.exe", "kitsat1.cfg", "kitsat1.pag" in "C:/wisp".
(3) GSC - Setup - Programs - Menu Title - "WiSP-TLM"
Startup Directory - "C:/wisp"
Program Name - "wisp-tlm.exe"
(4) GSC - Setup - Satellite Setup - "KO-23" - Edit -
- General - TLM Config File - "C:/wisp/kitsat1.cfg"
(5) GSC - Setup - Satellite Setup - "KO-23" - Edit -
- MSPE Settings - General - (Check)LOG Telemetry frames
(6) GSC - Programs - "WiSP-TLM" - Telemetry - Select Satellite -
- "KO-23" - Telemetry - Playback File - "KO-23" -
- "(telemetry file)" - Window - Communications - Telemetry - Play
Computer
Power
Temperature
Navigation
This (telemetry file) is a telemetry file that I received from KO-23
at today 06:45 UTC, 14 May 2000. This is in the following URL.
GIF_file is too in the same URL, and the three TLM_files open in it.
About the more informations (bwcc.dll etc), refer the below URL.
http://www.ne.jp/asahi/hamradio/je9pel/ko23tlme.htm
http://www.ne.jp/asahi/hamradio/je9pel/wisptlme.htm
----
Date: Mon, 15 May 2000 03:54:55 EDT
Subject: Re: WiSP-TLM for KO-23 with WiSP3215
To: je9pel@jamsat.or.jp
From: Reinricht@aol.com
Hello Mineo-san,
[[ I confirmed that
'WiSP-TLM' could decode only after receiving as a telemetry file
not 'realtime'.
Whenever I click on 'Telemetry' and then on 'Live from MSPE',
nothing happens. And when I then click on 'Play' immediately an
error message pops up. This is a certain fact, so I think this
may be a program bug. ]]
I suppose that MSPE of WiSP supplies different data then MSPE of WiSP32,
and this maybe the reason that "Live from MSPE" does not work with
WiSP32. It is a pity because realtime decoding would be a nice feature
together with WiSP32. For decoding from a file there exist already some
other programs. The article I was going to write for AMSAT-DL-Journal
was based on realtime decoding. Now when we realized that it does not
work I will not publish this article in the journal. In case that you
will have new findings in this matter please let me know.
73
Reinhard, DJ1KM
----
Date: Tue, 16 May 2000
Subject: WiSP-TLM
From: "M. Wakita" [je9pel@jamsat.or.jp]
To: c.jackson@eim.surrey.ac.uk,w0sl@amsat.org
Cc: DJ1KM@amsat.org,Reinricht@aol.com,K1uxbMa@cs.com
I thought that WiSP-TLM was actually a program for WiSP16(Windows3.1).
It could work 'realtime' in Windows3.1. When MSPE run, WiSP-TLM
indicate 'Connected to MSPE' in the bottom.
And it decode automatically in 'realtime'. I noticed that it decoded
every 3 seconds in case of KO-23 KO-25, and every 5 seconds in case of
UO-22. When MSPE closed, WiSP-TLM indicated 'Disconnected from MSPE'.
I hope to up version this nice WiSP-TLM program for WiSP32.
----
Date: Wed, 17 May 2000 07:40:21 EDT
Subject: Re: WiSP-TLM
From: Reinricht@aol.com
To: je9pel@jamsat.or.jp
Hello Mineo-san,
thank you for your further comments. I think G7UPN is the only who can
modify WiSP-TLM so that it will work together also with WiSP32. But I
doubt that he can do it because he is heavily overloaded with his work
at UoS. If there is any progress please keep me informed. Thank you.
73
Reinhard, DJ1KM
次のページへ移る．
ホームページ(目次)へ戻る．